Product Overview

1.Product IntroductionThe Blue & White All-in-One Cleaning Machine is a next-generation surface cleaning solution utilizing advanced laser cleaning technology. It offers non-contact cleaning that does not damage the substrate of the workpiece, enabling precise, selective cleaning at exact positi

1.Product Introduction

The Blue & White All-in-One Cleaning Machine is a next-generation surface cleaning solution utilizing advanced laser cleaning technology. It offers non-contact cleaning that does not damage the substrate of the workpiece, enabling precise, selective cleaning at exact positions and dimensions. The system operates without any chemical cleaning agents, consumables, or media, making it safe, environmentally friendly, and cost-effective.

Key advantages include:

• Non-contact cleaning – no damage to the part substrate

• Precision cleaning – selective cleaning at exact positions and sizes

• No chemicals or consumables – eco-friendly and economical

• Simple operation – power on and begin cleaning immediately

• High cleaning efficiency – saves significant time

• Stable laser cleaning system – requires virtually no maintenance

• Manual focus adjustment – adapts to curved surfaces

• Can be handheld or integrated with robotic arms for automated cleaning

Applications: The machine effectively removes resin, oil, grease, dirt, rust, coatings, platings, and paint from object surfaces. It is widely used in automotive parts, rubber molds, high-end machine tools, tire molds, rail transportation, and environmental protection industries.

Please read all safety instructions carefully before operating the machine.

2. Safety Information 

 Please read all safety instructions carefully before operating the machine.

General Safety:

• Ensure the machine is placed on a stable, level surface before operation

• Do not operate the machine in damp or wet environments

• Keep the work area well-ventilated

• Wear appropriate personal protective equipment (safety goggles, gloves) during operation

Electrical Safety:

• Connect the machine only to a properly grounded power outlet

• Do not modify the power cord or plug

• Turn off the machine and disconnect power before performing any maintenance or cleaning

• Do not operate the machine if the power cord is damaged

Laser Safety:

• This machine utilizes a Class 4 laser – direct eye exposure is hazardous

• Never look directly into the laser beam

• Operate the machine in a restricted area with appropriate laser safety barriers

• Use laser safety goggles rated for the operating wavelength

Operational Safety:

• Do not point the laser at people, animals, or reflective surfaces

• Keep flammable materials away from the operating area

• Do not attempt to disassemble or modify the laser system

• If the machine malfunctions, turn it off immediately and contact qualified service personnel

3. Technical Specifications

4. Installation & Setup

Unpacking and Inspection:
Upon receiving the machine, carefully open the packaging and inspect the equipment for any signs of damage that may have occurred during shipping. Any damage discovered after signing the receipt will not be covered under the shipping claim.

Installation:

1. Place the machine on a stable, level work surface

2. Connect the water cooling system according to the provided instructions

3. Connect the power cord to a properly grounded AC 110/220V outlet

4. Ensure the fiber optic cable is properly connected and not bent at sharp angles

5. Turn on the machine and allow it to preheat for 10–30 seconds before operation

Focus Adjustment:
The laser focus can be manually adjusted to accommodate different workpiece shapes and cleaning requirements. For curved surfaces, adjust the focus to ensure the laser beam follows the contour of the workpiece.

5. Operating Instructions 

Basic Operation:

1. Turn on the main power switch

2. Allow the machine to complete its preheating cycle (10–30 seconds)

3. Adjust the laser power within the 10–100% range according to the cleaning task

4. Position the cleaning head over the target surface

5. Begin the cleaning operation

6. The system operates without chemicals, media, dust, or water

Power Adjustment:
The laser power can be adjusted from 10% to 100% of the rated power to suit different cleaning applications and material sensitivities.

Automation Compatibility:
The machine can be operated either handheld or integrated with robotic arms for automated, production-line cleaning applications.

6. Maintenance 

Routine Maintenance:

• Regularly inspect the fiber optic cable for kinks or damage

• Check the water cooling system periodically to ensure proper coolant levels

• Keep the optical components clean and free from dust or debris

• Inspect all electrical connections for tightness and signs of wear

Laser System:
The laser cleaning system is highly stable and requires virtually no maintenance under normal operating conditions.

Cooling System:

• Monitor the water cooling system regularly

• Replace coolant according to the recommended schedule

• Ensure the cooling system is free from blockages

7. Troubleshooting

8. Warranty & Service

Warranty:The machine comes with a 2-year full warranty covering manufacturing defects and component failures under normal use.

After-Sales Service:

• Lifetime maintenance support

• Free technical consultation

• 24-hour customer service hotline for inquiries

• Nationwide on-site installation and training services available

Contact:For technical support, warranty claims, or any questions regarding the operation of your Blue & White All-in-One Cleaning Machine, please contact our customer service team.

9. Disposal

When the machine reaches the end of its service life, please dispose of it in accordance with local regulations for electronic and laser equipment. Do not dispose of the machine with regular household waste.

Specifications are subject to change without notice. For the most current information, please refer to the latest product documentation or contact the manufacturer.